Activated carbon is a common type of adsorbent material in biogas purification systems, primarily employed to remove hydrogen sulfide (H₂S), siloxanes, VOCs, certain sulfur compounds, and other trace contaminants from raw biogas. The advantage of activated carbon lies in the ability to tailor its pore structure and surface properties to specific contaminants. Removal of siloxanes and many VOCs relies primarily on physical adsorption; in contrast, H₂S removal typically employs chemically impregnated or modified activated carbon, achieving desulfurization through a combination of physical adsorption, chemical reaction, and catalytic oxidation.
Consequently, activated carbon for biogas treatment is not a single, standardized product. Requirements for the carbon media can vary significantly depending on the specific contaminants, their concentrations, and the intended end-use application.
Why Does Biogas Require Activated Carbon Treatment?
Untreated biogas typically consists mainly of methane (CH₄) and carbon dioxide (CO₂), but also contains varying concentrations of H₂S, moisture, siloxanes, and other trace impurities. So untreated biogas is not suitable for direct use as a fuel.
Hydrogen sulphide (H₂S) is a key issue; it is corrosive and produces sulphur oxides when burnt. Consequently, when biogas is used in combined heat and power engines, boilers, gas turbines or other gas-fired equipment, the hydrogen sulphide content must usually be controlled to meet equipment specifications and local emission standards.
Siloxanes represent another significant contaminant. Commonly found in biogas derived from sources such as municipal wastewater, sewage sludge, and landfill gas, siloxanes originate from silicon-containing personal care products, cleaning agents, and various industrial and consumer goods. Research indicates that siloxanes form silicon-based deposits during combustion, thereby impairing the operation of engines, turbines, and other equipment.
Therefore, the objective of biogas purification extends beyond merely improving gas quality; it is crucial for protecting downstream equipment and enhancing the viability of biogas as an energy source or as a feedstock for biomethane production.
How does Activated Carbon Work for Biogas Treatment?
Biogas treatment activated carbon is typically used in the form of extruded pellets and installed in a fixed-bed adsorption vessel. Raw biogas enters the activated carbon bed after undergoing pretreatment. As the gas passes through the carbon bed, contaminants enter the internal pores of the activated carbon and are trapped via physical or chemical adsorption.
As the activated carbon approaches saturation, contaminants begin to appear at the bed outlet; this stage is typically identified through breakthrough monitoring. Once the preset breakthrough limit is reached, the carbon bed must be replaced, regenerated, or disposed of.
In industrial biogas projects, the role of activated carbon is generally not the bulk removal of CO₂ or CH₄, but rather the purification and polishing of the gas to remove trace contaminants. Therefore, the general process flow is: Raw Biogas → Pretreatment → H₂S Removal → Siloxane/VOC Removal → Gas Utilization or Biogas Upgrading.
Узнайте цены от производителя и получите бесплатные образцы
Профессиональный производитель активированного угля с более чем 21-летним опытом. Индивидуальные решения для очистки воды, очистки воздуха, переработки пищевых продуктов, извлечения золота и других областей.
Activated Carbon for H₂S Removal
H₂S removal is one of the most important applications of activated carbon in biogas treatment. While standard virgin activated carbon possesses some capacity for the physical adsorption of H₂S, industrial biogas treatment typically employs impregnated activated carbon, selected based on H₂S concentration and specific treatment objectives.
Appropriate chemical impregnation enhances the material’s ability to react with or oxidize H₂S, resulting in desulfurization performance that significantly surpasses that of untreated activated carbon. Impregnation systems utilizing agents such as KOH, NaOH, or KI are commonly employed for various H₂S treatment applications; however, specific formulations and operating conditions must be determined based on actual gas composition, equipment design, and safety requirements.
Activated Carbon for Siloxane Removal
In addition to H₂S removal, the removal of siloxanes is another key application for activated carbon in biogas systems. Common siloxanes include organosilicon compounds such as D4, D5, and L2.
While these substances may not cause significant corrosion directly, when siloxane-laden biogas is utilized in engines or other combustion equipment, the siloxanes can transform into silicon-containing deposits that gradually accumulate on engine components, turbine surfaces, heat exchangers, and other parts.
Consequently, siloxane control is particularly critical for biogas-to-energy systems.
Virgin Activated Carbon vs. Impregnated Activated Carbon
This is a crucial factor when selecting activated carbon for biogas applications. Virgin activated carbon typically contains no added chemical impregnants, relying primarily on physical adsorption as its mechanism of action.
Consequently, it is well-suited for removing:
* Siloxanes
* VOCs
* Hydrocarbon compounds
* Certain odor-causing compounds
In contrast, impregnated activated carbon enhances the removal of contaminants such as H₂S by incorporating specific chemically active components onto the carbon surface.
| Параметр | Virgin GAC | Пропитанный углерод |
|---|---|---|
| Main Mechanism | Physical adsorption (physisorption) | Chemical adsorption + physical adsorption |
| Typical Target | Siloxanes / VOCs | H₂S / sulfur compounds (mercaptans, COS, CS₂) |
| CTC / CCl₄ Adsorption | >55% (mesopore-rich for larger molecules) | 40–60% |
| Bulk / Apparent Density | 0.40–0.55 g/cm³ | 0.55–0.65 g/cm³ |
| Hardness / Abrasion | ≥90–97% | ≥85–90% |
| Moisture Content | ≤5% | ≤5–8% |
| Содержание золы | ≤5–10% | ≤12–18% |
| Impregnant & Loading | None | KOH / NaOH, KI typically 6–20 wt% (8–15% recommended) |
| Particle Form | 4 mm pellet or 4–8 mesh GAC | 4 mm pellet |
| H₂S Working Capacity | 1–5 wt% (physisorption only) | 15–25 wt% (~0.12–0.34 g/cm³) |
| Siloxane / VOC Capacity | 5–15 wt% | Lower (pore volume occupied by impregnant) |
Заключение
In biogas upgrading and purification processes, activated carbon serves a critical function in biogas quality optimization. It removes harmful gaseous contaminants—including hydrogen sulfide, volatile organic compounds, ammonia, moisture residues and odor-causing organics—from raw biogas streams, effectively improving methane purity and mitigating common operational issues such as pipeline corrosion, equipment fouling and unpleasant emissions triggered by biogas impurities.
If you are looking for activated carbon solutions for biogas purification, upgrading and biogas plant treatment units, please contact our technical experts to develop a customized, cost-effective biogas filtration and purification solution.
